Which focus-ring setting triggered the fault?

Fujifilm released X-T5 body firmware 4.32 on November 10. The company says an XF30mmF2.8 R LM WR Macro could stop responding to manual focus input when the photographer selected linear ring operation and changed the rotation angle from its default. That combination matters for close-up work. A photographer who has chosen a longer turn for precise adjustments can encounter the issue while a colleague using the same lens at its default angle may never see it.

How to check your setup

Start with the body version, then look under Button/Dial Setting for the lens zoom and focus settings. Note the selected ring operation and angle before changing anything. After installing the update, place a printed label at an oblique angle in good light. Use your customary manual-focus setting and move the sharp plane from the nearest letter to the far edge. A visible shift in the enlarged preview makes a more informative check than turning the ring while pointing at a blank wall.

Top view of the X-T5 showing its physical control dials.
The X-T5 has physical exposure dials. The linear focus-ring angle is configured in its menus. 昼落ち / Wikimedia Commons original / CC BY-SA 4.0. Full-frame responsive WebP reproduction under the same license.

Three other symptoms in the release notes

Fujifilm also lists an occasional freeze about a minute into playback of a movie recorded at 6.2K or higher. For stills it describes occasional abnormal images in ISO or film-simulation bracketing. A separate horizontal-line issue concerned the LCD during high-speed continuous shooting with electronic shutter operation, a shutter speed of 1/8000 second or faster and continuous image display. When investigating lines, compare the saved file with what appeared on the monitor before drawing conclusions.

Plan the update around the next shoot

The firmware is available at no charge on the US support page linked below. Use the instructions and file for the X-T5 body, check the installed version and back up custom settings. Fujifilm recommends a fully charged battery. Leave time to check one normal still, a bracketed sequence if you use one, and playback of a familiar clip before packing the camera. These checks are suggestions for owners. The list of corrected faults comes from Fujifilm.